Description:

• Work area capacity: 4,250mm (167"), length 1,250mm (49.25") front/back and 100mm (3 7/8") material height
• Boring unit with 22 independent vertical spindles: 11 in X-axis, 11 in Y-axis with one shared spindle
• Six (6) horizontal spindles in X-axis for edge boring in the left (3) and right (3) panel edged and (2) spindles for edge boring in the front and rear panels edges.
• One (1) 11HP (7.5kW) high speed vertical router with "on-board ride along" (12) tool tool changing carousel (HSK-63 tool holders with tapered shank) for on the fly tool changes. Programmable right or left rotation. 1250-18000 RPM
• One (1) 7.5HP (5kW) high speed vertical router with (8) position tool changer. 6000 - 18000 RPM
• 11HP router equipped with 360� C-axis rotation around Z-axis with operating unit for various aggregates, all capable of machining 360�with the (� 180�)
• Central dust extraction with programmable hood
• Work area with (11) movable support rails with side mounted raise and lower panel feeding rails, (3) square matrix vacuum cups each, program controlled pneumatic backstops for large panels, movable pneumatic side stops and the dual central zero-stop create two (2) working zones.
• The head travels on THK linear motion guides on all axes, feed speed on X-axis and Y-axis is 263 FPM 80/m/min), and 82 FPM (25 m/min) on the Z-axis. Axis stroke on X-axis is 4,455mm (175"), Y-axis 1,685mm (66") and Z-axis 260mm (10").
• Weeke Homatic 2000 Windows based Pentium controller for (3) axes; linear, circular & helical interpolation; programmable logic control machine operation system.
• Features 14" VGA monitor, industrial keyboard for data entry, 3.5" floppy disk drive, 540MB hard drive, 16 bit processor (Windows 95), free plug for network, RS-232 serial interface for simple PC connection. All mounted in separate free-standing control cabinet.
• Includes "WoodWOP" programming software for a remote computer.
• Two (2) 100 cbm/HR vacuum pump
• Man height safety enclosure around rear and sides of the machine
• 2 zone safety lights (will stop machine if operator enters work area)
• Machine length: 6000mm (19`8")
• Machine width: 4575mm (15`)
• Machine height: 2620mm (8`7")
• 1x external vacuum connection for user made fixtures
• 2nd row of backstops
• Scales and arrows at panel support pails and vacuum pods for ease of set-up
• Wiring according to CSA standards
• A voltage stabilizer
• A hand held terminal for set-up ease
• NOTE: all activation, re-licensing and training of supplied software are the sole responsibility of the purchaser.