TMW Machine: #642
Manufacturer: Weeke
Model: Venture 3
YMFG: 2006
Voltage: 230V 60Hz 3Ph
Condition: Very Good Condition
Price: $ 80,000
Location: Northeast
Description:
General Specifications:
-
Travel range: "X" Axis is 3,810 mm (150"), "Y" axis is 1,735 mm (68.3"), "Z" axis is 220 mm (8.7")
-
Working capacity: "X" Axis is 3,250 mm (127.9"), "Y" axis is 1,220 mm (48") for boring & 1,325 mm (52.2") for routing, "Z" axis is 125 mm (4.9"); "X" axis travel speed of 100 MPM (328 FPM), "Y" axis travel speed of 50 MPM (164 FPM), "Z" axis travel speed of 20 MPM (66 FPM); head travels on THK linear motion guides on all axes.
-
Boring unit with: (19) Vertical drill spindles, (11) spindles in "X" axis & (8) in "Y" axis; (6) horizontal spindles, (2+2) in "X" axis for edge boring, (1+1) in "Y" axis for front & back edge boring; grooving saw aggregate in X-direction using a 100 mm dia. saw blade.
-
Equipped with: 12 HP (9 kW) Liquid cooled electro-spindle router with adaptor, powered by a frequency inverter w/programmable 1,250 - 24,000 RPM (9,000 - 24,000 RPM = constant torque), RH or LH rotation; "C" axis for 360° horizontal processing; ride-along 8-position ATC tool changer magazine.
-
Worktable: (6) Moveable K-Table support rails w/side mounted raise-and-lower panel feeding rails, (12) standard & smaller vacuum pods (2 pods per rail); LED & laser assistance through the PC control display for precise rail & vacuum pod positioning.
-
(6) Pneumatic backstops, (2) pneumatic side stops create (2) working zones.
Weeke IPC PC 85 "POWER CONTROL" + Windows "XP" + WoodWOP operating system for (3) axes with linear, circular & helical interpolation.
-
15" TFT monitor, industrial keyboard for data entry, CD R/W & floppy drive, 40 GB hard drive, modem, USB slot, RS-232 serial interface for possible simple PC connection; all mounted in separate free-standing control panel.
-
Complete with: 200 cbm/Hr Vacuum Pump, 2-zone safety mats (will stop machine if operator enters work area) & safety fences. Options Include: Removable half zone "Convertible" flat table for possible nested base processing = the BEST of BOTH WORLDS; Pod & Rail & FT processing all on the same machine!