TMW Machine: #381
Manufacturer: Homag
Model: Optimat KL 74 A3
YMFG: 1999
Voltage: 600V 60Hz 3Ph
Condition: Very Good Condition
Price: CDN $ 33,350
Location: Eastern Canada
Description:
-
Powered top pressure rise and fall
-
Powered double "V" belt top pressure
-
Homatic NC 21 Windows compatible programmable controller
-
Pictogram diagnostics on controller screen
-
Telephone trouble shooting
-
Electronic frequency converter on all machining heads
-
Coil feed for material up to 3mm - Sound enclosure for all machining heads
-
WK03 double motor high speed end trims for straight or angle cutting with pneumatic changeover
-
Free space for fitting of addition units
-
Outrigger support adjustable to 800mm
-
Dust extraction through the base of the machine
-
Back-off of glue roller and edging feed in case of feed chain stop
-
80mm (3.15") wide rubber covered feed chain on hardened guideways
-
Magnetic braking on the feed motor
-
Feed from 18 to 35m/m (59 to 115`/m)
-
Minimum working width 55mm
-
Maximum part overhang of 30mm
-
Part thickness 12 to 60mm
-
Coil edging from .3 to 3mm
-
Maximum coil diameter of 830mm
-
QA34 gluing unit
-
Granule glue reservoir
-
Electronic glue temperature control
-
Reversible glue applicator roller
-
2 vertical coil edging magazine with automatic changeover on completion of a coil
-
Pneumatic pressure roll section with 1 powered pressure roller 150mm diameter and 2 idle rollers 70mm
-
12,000rpm angled or straight end trims
-
2 powered rubber in-feed rollers angled toward the fence line
-
KL70 automatic chain lubrification
-
3.5mm maximum edge thickness
-
350mm between panels
-
2 X 1.5kw 12,000rpm top and bottom rough trim unit
-
Height adjustment with top pressure beam
-
2 X .4kw 12,000rpm top and bottom fine finish trim units
-
Pre-disposition for addition of 3mm profile scrapers
-
Top and bottom oscillating buffers
-
Top buffer adjusts for height with top pressure beam